Laser ceramic ring
Compare laser ceramic ring and nozzle holder references using the original part, full profile and mounting details. One matching dimension or a similar photo is only a starting point.
Use the ceramic ring inspection guide to prepare a replacement request, or send the original ring reference, photos and quantity for a quote.
Only takes a few seconds!
Categories
Contact Us
- Gavin yuan
- [email protected]
- +86 19853162275
- Mon – Sun. 9.00 – 20.00
- +86 19853162275
- No. 9, Luoshan Road, Xuzhou Economic and Technological Development Zone, Jiangsu Province, China
Certification
-
Laser ceramic ring
BOCHU D20 M11 H28 Laser Ceramic Ring
-
Laser ceramic ring
BOCHU D20 M8 H28 M8*0.75 Laser Ceramic Ring DY.C.A0004AA
-
Laser ceramic ring
BOCHU D40.8 M11 H34 Laser Ceramic Ring
-
Laser ceramic ring
BOCHU D41 M11 H22 Laser Ceramic Ring M16*1 DY.C.A0009AA
-
Laser ceramic ring
Bodor D20.6 M8 H13.7 Laser Ceramic Ring
-
Laser ceramic ring
Bodor D28 M11 H12 Laser Ceramic Ring BD-01A-1-28 31220000002
-
Laser ceramic ring
Bodor D31 M11 H14 Laser Ceramic Ring
-
Laser ceramic ring
D17.5 M6 H17.6 Laser Ceramic Ring
-
Laser ceramic ring
D17.5 M6 H17.6 Laser Ceramic Ring 936678/913966
-
Laser ceramic ring
D18 M8 H10.5 Laser Ceramic Ring
-
Laser ceramic ring
D25 M7 H11.2 Laser Ceramic Ring
Ceramic ring identification and quotation checklist
Compare the complete ring profile
Record the largest outside diameter, overall height, thread designation and pitch, and the shape of the contact and seating areas. Keep the original head model and part number with these measurements. The catalogue distinguishes some similar-looking rings by their maximum diameter, so a front-view photograph alone can miss a relevant difference.
| Reference or check | Details |
|---|---|
| Identity | Head brand, full model/version, original ring reference and packaging label. |
| Profile | Top, side and underside photos; labeled dimensions and mounting interface. |
| Request | Required quantity and whether a ring alone or another holder component is needed. |
Review each reference separately
WTC-01A D28 M11 H12, WTC-04 D19.5 H12.6 M8 and FC-40 D21.4 M8 H13 are separate listing references. Do not substitute one for another because a thread or one diameter appears to match. Ask for a part-specific comparison with the original drawing.
Record a replacement reason
Include photos of a damaged or removed ring and explain whether the request follows a collision, visible damage or a planned service. Let a qualified service technician assess the machine symptom under the manufacturer’s procedure. The ceramic ring inspection guide helps organize the information; it does not establish the cause from a photograph.
Request a ceramic ring identification check and quote
This website currently accepts inquiries only; online payment and shipping are not available.





























