Laser glass cutting requires a process matched to the glass and the finished part. One approach described by Coherent uses ultrashort laser pulses to form a line of modifications through the glass, followed by a separation step. This differs from choosing a metal-cutting machine by its power rating. For a useful equipment inquiry, specify the glass, geometry and required edge condition together.
Identify the exact glass and its processing state
Send the material designation and supplier datasheet when available. State whether it is soda-lime, borosilicate, aluminosilicate or another glass. Record thickness, thickness variation if specified, coatings, laminations and whether the material has been strengthened or otherwise treated.
Explain the sequence of manufacture: which treatments happen before cutting and which happen afterward? Ask the supplier to assess the exact material in that state. A successful demonstration on another glass or an untreated sample is not approval for your production material.
Understand the cutting and separation stages
In the ultrashort-pulse filamentation example, the laser creates closely spaced modifications along a contour; a subsequent separation operation releases the part. Coherent describes localized thermal stress as one separation method. The laser source, beam-delivery optics and motion system are selected as a process together.
Ask the proposed supplier to identify the route used for your job and list every included step. Establish whether the quoted result is a scribed blank, a separated part or a finished component ready for the next operation. Include any edge finishing, cleaning and inspection in that definition.
| Requirement | Information to provide | Question to resolve |
|---|---|---|
| Material stack | Glass designation, thickness, coatings, strengthening state and datasheet. | Has this exact stack been evaluated at the proposed process stage? |
| Part geometry | Dimensioned outline, holes, slots, corner radii and drawing revision. | Which features need separate trials or finishing? |
| Edge condition | Permitted chips, cracks, edge finish and inspection method. | How will the sample be examined and accepted? |
| End use | Assembly conditions and the mechanical or optical acceptance specification. | Which functional checks are needed after separation? |
| Production scope | Blank size, part mix, batch quantity and handling constraints. | What is included in the measured complete cycle? |
Evaluate more than the visible outline
Start the sample review with the drawing revision, sample identification and inspection plan. Agree where dimensions are measured and how edge defects are recorded. Request photographs at the agreed magnification rather than relying on a distant image of the finished shape.
For applications with strength, bending or optical requirements, ask the responsible engineer to define the appropriate test and acceptance rule. Cutting a correct outline does not establish that the component meets its final functional requirement.
Include difficult features in the sample plan: small holes, internal corners, narrow bridges or coated regions present in the real design. Retain the trial conditions and inspection results with the sample so that the accepted configuration can be referenced in a later proposal.
Compare complete equipment proposals
Request a scope covering the laser source, beam delivery, motion, fixturing, separation, part removal and inspection. Ask which operations are automatic and which require manual handling. List the utilities, guarding, training and maintenance documentation included in the proposed installation.
Compare complete good-part cycle time for the agreed drawing, including loading, processing, separation, inspection and rejected parts. Keep demonstration results tied to their material and process conditions; do not transfer a performance figure to another thickness or part shape.
Request written confirmation for the proposed configuration. A metal-cutting machine listing or a protective-window dimension is not a glass-cutting qualification, and this guide does not assign that capability to a specific FINNLASER model.
Glass cutting inquiry
- Material: [designation, supplier datasheet, thickness and treatments]
- Stack: [coatings / laminations / other layers]
- Drawing: [revision, outline, holes, radii and tolerances]
- Delivered condition: [scribed / separated / finished; required inspection]
- Workload: [blank size, part mix and batch quantity]
- Evaluation: [sample availability, edge and functional acceptance criteria]
Frequently asked questions
Can an ordinary metal-cutting laser be assumed to cut glass? No. Ask for evidence for the exact glass and proposed process configuration. A shared power rating does not establish the application.
Does “laser cut” mean no further finishing? Define the delivered condition in the proposal. Separation, edge finishing, cleaning or inspection may form separate operations in the agreed route.
What should I send before a sample discussion? Begin with the glass datasheet, processing state and dimensioned drawing. Add the final acceptance specification and photographs of any coating or existing edge issue.
Related reading and inquiries
Technical reference: Coherent: coverglass and window cutting with ultrashort-pulse lasers. This reference explains a process; its equipment specifications are not FINNLASER product specifications.
Send a glass-processing inquiry. Include the information above so the proposed scope can be reviewed for your application.
FINNLASER accepts inquiries. This website does not offer online payment or shipping; any order terms must be confirmed separately.

















